Spartus XPro MIG 300 Dual Pulse MIG TIG MMA Package

SPARTUS XPro MIG 300 Dual Pulse

industrial stability and full process control in a modern form

SPARTUS XPro MIG 300 Dual Pulse a modern inverter MIG welder built for users who expect high output, a stable arc and maximum control over the welding process. Three phase 400V supply, maximum welding current 300A and a 60% duty cycle give the power reserve that demanding workshop, production and assembly work calls for.

The machine runs the processes MIG/MAG in manual, synergic, Pulse and Dual Pulse modes, as well as TIG Lift and MMA. That is why the XPro MIG 300DP works both for standard welding of structural steel and for the harder jobs on stainless steel or aluminium, where control of arc energy and the appearance of the weld decide the result.

MIG/MAG welding, more control, better weld quality

The main area of work for the SPARTUS XPro MIG 300 Dual Pulse is an advanced MIG/MAG process designed for a steady arc, fast setup and highly repeatable results. The operator can work in manual mode, which leaves every setting free, or use the synergic programs, which set the parameters automatically to the material, the wire diameter and the shielding gas.

A key advantage of the machine is that it can run in Pulse and Dual Pulse modes. Pulse technology lets you control precisely how much energy goes into the material, which means a steadier arc, less spatter and better command of the weld pool. Dual Pulse additionally produces the distinctive, neat weld structure that resembles TIG welding, while keeping the productivity of the MIG/MAG process. It works particularly well on aluminium and stainless steel, where limiting overheating and controlling distortion decide the quality of the finished joint. Adjustment of the pulse parameters, the pulse frequency and the base current lets you match the behaviour of the machine to the material and to the technical requirements.

The machine offers advanced torch modes: 2T, 4T, S2T, S4T and SPOT. The classic 2T and 4T modes make it easy to match the work to short or long welds, while the extended S2T and S4T modes let you control the start and the end of the process. The operator can therefore manage arc striking, start current, end parameters and crater filling precisely.

The SPOT mode produces repeatable spot welds and raises accuracy on parts where weld time has to be controlled. Inductance adjustment lets you match the arc character to the material and the welding position, from a softer arc to a more dynamic and focused one. In practice that means better control of penetration, less spatter and a steadier process.

The SPARTUS XPro MIG 300DP also offers detailed control over the welding sequence. The operator can set parameters such as pre gas and post gas flow, Soft Start, arc start and end parameters or Burn Back, which handles the correct end of wire feeding. The Slow Feed function in turn gives a controlled start of the wire feed, which improves striking stability and comfort in use.

Synergic programs

SPARTUS XPro MIG 300 Dual Pulse offers synergic programs for the most commonly used materials and applications. The machine works with mild steel, stainless steel, aluminium and self shielded flux cored wire, among others. Synergy lets the operator start faster and then correct the parameters according to experience and to the requirements of the particular joint. It combines automatic setup with conscious control of the process.

Built in 4 roll wire feeder

Steady wire feeding is decisive for the quality of MIG/MAG welding. The SPARTUS XPro MIG 300 Dual Pulse has a built in four roll wire feeder, which delivers smooth and even wire transport.

The feeder sits inside the housing and has a practical window with internal lighting, which makes it easier to check the spool, the wire guide and the roller setting. That helps in particular when changing wire, working in poorly lit places and checking the station quickly before welding. A space for spare rollers in the feeder also keeps the most used accessories at hand without any extra storage.

The machine also works with a torch of the Spool Gun type, which extends what you can do with soft wires, above all aluminium. This improves feed stability and reduces the problems that come from guiding soft wire over a longer distance.

Electromagnetic compatibility (EMC)

The SPARTUS XPro MIG 300 Dual Pulse has high electromagnetic compatibility (EMC), which means stable operation without interference in a demanding industrial environment. The machine was designed not to affect other machines and control systems, while staying immune to interference from outside. That gives you dependable work around automation, robots and modern production installations.

20 memory channels, repeatability without lost time

The machine offers 20 memory channels for storing your own welding parameter settings. That helps a lot with repeat parts, different materials or fixed production tasks. The operator can save proven configurations and return to them quickly, without setting every parameter again. The result is shorter setup time, less risk of a mistake and better process repeatability.

Ease of use and a clear LCD panel

A modern control panel with a legible LCD display gives quick access to the most important functions and parameters. The interface guides the user through the choice of process, material, wire diameter and additional settings, so operation stays straightforward even with everything the machine can do.

During welding the key working parameters appear on the screen, which lets you follow the process and react quickly to what a particular job needs.

TIG Lift Pulse - advanced parameter control

The SPARTUS XPro MIG 300 Dual Pulse is not limited to MIG/MAG welding. The TIG Lift mode allows precise TIG DC welding with contact arc striking, without high frequency HF. That is a practical solution wherever more control over the process and a good looking weld matter.

The XPro MIG series takes TIG Lift a step further. The machine has an advanced TIG Lift Pulse function with a pulse mode and access to extended settings of the welding sequence, including adjustment of pulse frequency and pulse width. This allows even finer control of the arc, of the heat input and of the character of the weld, which users working with thinner material or fine detail will appreciate.

Besides standard TIG torches with a gas valve, the SPARTUS XPro MIG 300 Dual Pulse also works with TIG torches that have a control in the handle and a EURO connector. The operator can then manage the welding process without taking a hand off the torch, which adds noticeably to comfort and ergonomics. In this option, besides the 2T and 4T modes the machine also offers an 8T mode for an extended torch control cycle. This simplifies a multi stage welding process and removes the need to hold the torch trigger down, which makes the work easier on the operator.

MMA Pulse and intelligent process control

The SPARTUS XPro MIG 300 Dual Pulse offers an extended MMA Pulse process, which gives more control over the welding arc, steadier operation and a better match of the welding characteristic to the conditions and to the operator's preference. The machine also has functions that support comfort and quality of work such as: Hot Start - easier striking of the electrode, Arc Force - arc stabilisation during welding, VRD - more safety through a reduced open circuit voltage.

The XPro MIG series additionally offers two advanced MMA characteristic modes: constant current and constant power.

MMA Constant Current, a stable and predictable arc

In MMA Constant Current mode the machine holds the welding current steady regardless of changes in arc length or working conditions. This gives a highly stable process, makes it easier to guide the electrode and produces repeatable weld quality. Automatic holding of the set current cuts the need for constant correction by the operator, which adds comfort and makes the process easier to control.

MMA Constant Power, intelligent parameter matching

The MMA Constant Power mode adjusts output voltage and current dynamically to hold the welding power constant. The machine therefore adapts its behaviour automatically to changes in arc length and in process conditions. This adds stability, simplifies operation and lets you match the settings faster to different materials and welding positions. The operator sets the power wanted and the machine optimises the remaining parameters.

A stable trolley and a build ready for work

The SPARTUS XPro MIG 300 Dual Pulse is mounted on a stable transport trolley with a place for the gas cylinder. This makes it easier to organise the station, move the machine and work in different parts of a workshop or production hall.

IP23S protection raises resistance to demanding operating conditions, and the solid housing with its well planned layout means the XPro MIG 300DP is ready for intensive daily work.

Another advantage is the intelligent cooling control system (Fan Stop), which runs the fan only when it is needed. That means quieter operation, less dust drawn in and a longer service life of the components.

More working reach, fewer limits

A well planned cable configuration, a 3 metre welding torch, earth cable and mains cable, gives real freedom of movement around large parts and cuts the need to move the machine often. A 3 metre gas hose with a quick coupling speeds up connection and makes the station easier to organise, which adds to working efficiency.

Technology built for efficient and repeatable work

The SPARTUS XPro MIG 300 Dual Pulse is a MIG welder for users who expect not only output but also full control over the process and high weld quality. The combination of Dual Pulse technology, extended synergy, a steady 4 roll feeder and advanced MIG/MAG settings makes the machine suitable both for daily workshop work and for demanding production jobs.

It is built for work where stability, weld appearance and the repeatability of every next joint are what count.

Warranty

The warranty period for SPARTUS XPro series machines is up to 36 months.